Moření hliníkových dílů - Rohde AG | Quality for Industry | Čeština
Domů>> Povrchové úpravy>>Moření hliníkových dílů

Clean Pickling of Aluminium Components

  • Aluminium-component, clean pickled
  • Partial view of the clean pickling automatic plant for aluminium components; laser reservoir being taken out of the unit
  • When highest cleaness is demanded, all components of a laser must be packed separately after the clean pickling
  • Aluminium-component, clean pickled
  • Partial view of the clean pickling automatic plant for aluminium components; laser reservoir being taken out of the unit
  • When highest cleaness is demanded, all components of a laser must be packed separately after the clean pickling

Aluminium-component, clean pickled

Machined mechanical components, which have to be assembled under clean-room conditions must be free of surface impurities.

For example, the aluminium elements for the laser industry shown here are cleaned in a 17-stage degreasing and pickling process (partly automatic, partly manual) to meet these extreme demands. The plant specially developed for this purpose was necessary to attain perfect results even in hollow chambers and blind bore holes. The material abrasion entailed here amounts to approx. 20-50 µm and need only be taken into account at fine screw threads.

Maximum workable size of item in mm
  Length Width Height
Clean pickling of aluminium 400 400 1200

Kontakt

Rohde AG

Industriestrasse 9
D - 37176 Nörten-Hardenberg

Telefon.: +49 (0) 5503 9860-0
Telefax: +49 (0) 5503 9860-11 
 
info@rohde-technics.com

Loading…
Loading the web debug toolbar…
Attempt #